Do you get a hole in your clothing from a brooch or pin?
A brooch or pin goes through the fabric with a small needle. This always creates a very small opening, but it does not have to remain visible after removal. Whether you eventually see a hole, distortion, or pulling fabric depends primarily on the material of your clothing, the weight of the accessory, and how you wear it.
Caution is especially advisable with silk, viscose, and other delicate fabrics. Denim, wool, and sturdy cotton can usually better support the weight of a pin or brooch. In this guide, you will read which fabrics are suitable, how to limit damage, and what you can wear if you do not want to put a pin through your clothing at all.
In short
- Sturdy fabrics are usually the most suitable for brooches and pins.
- With thin and delicate fabrics, a hole can remain visible.
- A heavy accessory can pull the fabric downward.
- An extra layer of fabric on the back provides more support.
- With Wearable Wall Art and the Magnetic Brooch Cover, no pin goes through your clothing.
When can a brooch or pin leave a visible hole?
A pin or brooch with a needle makes a small opening between the fibers of the fabric while wearing it. With sturdy materials, those fibers often close again after removal, so you see little to nothing.
With delicate, loosely woven, or fragile fabrics, the needle can push fibers apart or damage them. If the accessory is heavy or moves a lot while being worn, the small opening can also be stretched.
A pin or brooch does not have to leave a permanent hole. The combination of fabric, weight, and movement makes the difference.
Which fabrics are suitable for brooches and pins?
Sturdy fabrics
Denim, wool, canvas, thick cotton, and sturdy knitted fabrics can usually support the weight of a brooch or pin well. This makes the accessory move less and the chance of a visible hole smaller.
Thin and delicate fabrics
Be careful with silk, satin, viscose, chiffon, and thin blouses. On these fabrics, even a small, light pin can cause a visible hole or a pull.
Are you in doubt? Then test the pin first in an inconspicuous spot, for example, on the inside of a hem. For a delicate garment, prefer to use a magnetic attachment.
How to reduce the risk of damage
1. Choose a sturdy spot
Place a brooch or pin on a part of the garment that provides sufficient support. Think of the lapel of a blazer, the chest of a jacket, a sturdy collar, or a thick knitted part of a sweater.
2. Pay attention to the weight
The heavier the accessory, the more force is placed on the fabric. Therefore, choose a small, light pin for lighter fabrics and save larger brooches for sturdy clothing.
3. Give the fabric extra support
A small piece of sturdy fabric, felt, or a cotton pad on the inside of your clothing can distribute the weight better. This also helps if a brooch or pin tilts forward or rotates while being worn.
4. Prevent unnecessary movement
A pin that keeps moving back and forth can make the opening in the fabric larger. Therefore, check if the clasp is secure and do not place the accessory on a spot where a bag strap, coat, or seat belt constantly rubs against it.
5. Remove the pin carefully
Do not pull a pin or brooch out of the fabric at an angle. First open the clasp and remove the pin slowly and straight through the material.
Are small pins better for your clothing?
Small pins are usually lighter than large brooches. As a result, they pull on the fabric less easily and are pleasant to wear on, for example, denim, a jacket, a sturdy sweater, a beanie, or a bag.
However, even a small pin has a needle that goes through the fabric. For very delicate clothing, caution remains important. View the current designs in the Pins collection .
What can you wear if you don’t want to make a hole in your clothing?
Don’t want to push a pin through your clothing? A magnetic fastening is a great alternative. La Miséto’s Wearable Wall Art designs have a magnet on the back. You can display them on the wall as small art objects and wear them on your clothing.
To wear Wearable Wall Art on your clothing, use the separately available Magnetic Brooch Cover. Place the cover inside your clothing and the WWA piece on the outside. The magnets hold the design in place without a pin passing through the fabric.
The Magnetic Brooch Cover is not included with a WWA piece. You can, however, use one cover with several Wearable Wall Art designs.
Want to know exactly how to display and wear a design? Discover what Wearable Wall Art is and how it works.
With the Magnetic Brooch Cover, you can wear Wearable Wall Art without a pin through your clothing.
A statement without a pin
Discover small, reflective works of art that you can hang on the wall and also wear on your clothing with a magnetic cover.
View Wearable Wall Art →Are the classic brooches still available?
The classic, layered brooches with a needle pin are being discontinued and will not be produced again. You can find the remaining items, while supplies last, under Last Pieces .
Frequently asked questions about holes from brooches and pins
Does every pin leave a hole?
A pin goes through the fabric and therefore creates a small opening while being worn. With sturdy fabrics, this usually closes again. With thin or delicate fabrics, the hole can remain visible.
Which fabric is most suitable for a brooch?
Denim, wool, canvas, thick cotton, and sturdy knits are usually the most suitable. They provide the accessory with sufficient support.
Can a heavy brooch damage clothing?
Yes. A heavy brooch can pull thin fabric downward and make the opening around the pin larger. Therefore, only wear heavy accessories on sturdy clothing.
How do I wear a brooch without a hole?
Choose an accessory with a magnetic attachment. Wearable Wall Art can be worn with the separately available Magnetic Brooch Cover without a pin going through your clothing.
Can I safely wear a pin on a bag?
That is usually fine on canvas, denim, and other sturdy materials. Do check whether you can pierce through the material and if the pin cap on the inside is protected.